Butterfly
828-FlatNeedleButterfly1160.01
Flat Needle for 828 Lantern
The flat needle is extremely important to the operation of the #828 lantern. As you turn the red knob, the needle is moved through the nipple at the top of the lantern, cleaning out any obstruction that may have lodged there. One...
$1.25828-PumpCapButterfly4790.05
Chrome Pump Chamber Cap
This is the chrome cap that holds the pump in place so it stays centered while pumping.
$2.50828-PicksButterfly15880.05
Cleaning Needle 3-Pack
You get 3 hand-held cleaning needles to clean the nipple manually. These picks also work well with the #2412 Pressure Stove, as the needle is slightly smaller than the picks that come with the stove, so they will fit through the venturi...
$1.252412-FlameButterfly2910.05
Flame Ring for 2412 Stove
Genuine replacement flame ring for top of 2412 Burner.
$3.002412-NippleButterfly50.05
Nipple for 2412 Brass Stove
Genuine replacement nipple for burner on Butterfly 2412 Brass Pressure Stove. While it is possible to remove and install the nipple with needle-nosed pliars, Nipple Spanner/Wrench Special Tool is recommended.
$9.002412-SpiritButterfly1460.05
Spirit Cup for 2412 Stove
Genuine replacement spirit cup for Butterfly 2412 Brass Pressure Stove
$3.00828-NozzButterfly5470.1
Ceramic Nozzle
The nozzle distributes the vaporized kerosene throughout the mantle. The mantles attach to the nozzle. They are manufactured to withstand extreme temperatures, but if dropped or handled roughly, they will break.
$3.50828-ExcenterButterfly2300.1
Excenter (Brass Linkage)
Don't ask me why they call it an excenter. I don't know. It includes the red on/off knob, nut, plus the brass linkage for opening/closing the valve.
$9.952412-SpannerButterfly940.1
Nipple Spanner/Wrench Special Tool
If you've ever tried to remove or install a nipple from a brass stove, you know how frustrating it can be. There is just so little room for a wrench to be able to move to loosen the nipple. I've obtained some Nipple Spanner tools from...
$9.00828-GaugeButterfly00.1
Pressure Gauge Cap - Discontinued
This item has been discontinued by Butterfly. It has been replaced by a filler cap with pressure release screw, but no gauge. If you order one, you will be charged $0 and will receive nothing. The new part is a cap with a rubber washer and air...
... more info828-ValveButterfly3460.1
Pump One-Way Air Valve
This is the one-way valve that is at the bottom of the pump tube. It is a spring-loaded valve that opens when the pump tube is pressurized, allowing air into the fuel tank. The spring then pushes the valve closed on the return pump...
$6.00828-SchraderButterfly30.1
Schrader Valve Adapter
Converts your #828 Pressure Lantern so it can be pressurized using a quality hand pump, bicycle pump or air compressor. Includes screw cap with installed Schrader valve, plus teflon tape to seal the threads. Instead of pumping hundreds...
$15.00